ÖZLER and Elkamachines

Cooperation

OZLER Formwork and Scaffolding Systems was established in Istanbul in 1996 with the purpose of providing services as a business partner to construction companies. We are offering wide range of services such as project planning, design, manufacturing, sales, rental business, technical support after sales, supervision and project consultancy.

Products

You Can Rent Our Products

SAFETYSCAFF / Safetyt Facade Scaffolding

Product information

SAFETYSCAFF is designed in accordance with European EN 12810-1 standards with %100 safety rules. TS EN 74-3 certified base jacks are used to balance the floor. With TS EN certified anchor elements, the system is fixed to the facade where it is installed. OZLER provides assembly and disassembly services everywhere in Romania.

RAPID / Panel Formwork System

Product information

RAPID is a steel frame, plywood surfaced panel formwork system carried by hand. In the main frame of the system, specially shaped S420 MC steel profile with high buckling resistance value designed by Welser profile is used. 15 mm birch plywood is used for panel surfaces. Panel widths are 30-45-60-75-90 cm and heights are produced as 90-120-150-270-300 cm.

UNISCAFF / Ring-Lock Scaffolding System

Product information

UNISCAFF is designed in accordance with European EN 12810-1 standards with %100 safety rules. TS EN 74-3 certified base jacks are used to balance the floor. With TS EN certified anchor elements, the system is fixed to the facade where it is installed. OZLER provides assembly and disassembly services everywhere in Romania.

SLABFLEX / Shoring Telescopic Prop System

Product information

SLABFLEX is produced according to the maximum working height of 3,0-3,5-4,0-4,5-5,0-5,5 mt as standard. It is easy to install and transport. TS EN 1065 certified SLABFLEX outer pipes 60*2,5 ve 76*3,0 mm and inner pipes 48 * 3 or 60 * 3,0 mm TSE certified, mechanically tested industrial tubes.

SLABFORM-LT / Shoring Scaffolding System

Product information

System is used as carrier scaffolding under slab and beam. Scaffolds can be displaced by transport trolleys and crane without disassembly, thus saving labor costs and time. TS EN 12813 certificated frames are manufactured as 120 cm width and 120-150-180 cm high as standard.

SAFETYBOARD / Edge Protection Panel

Product information

System is designed in accordance with European EN 13374-B standards with %100 safety rules to minimize the risk of falling in ongoing or completed construction projects. The panels are manufactured width 125 and 250 cm as standard.

SAFETYNET / Safety Console

Product information

System is designed in accordance with European standars EN 1263-1 with %100 safety rules. Installation is done at the construction site and raised by crane. It has a design that can carry 1 personnel if he falls on the net from a maximum height of 7 mt. SAFETYNET is produced as 400*300-400*400-400*600 cm dimensions as standard.

FORMDECK / Material Transport Bracket

Product information

System is designed in accordance with %100 safety rules for material transport between the floors in ongoing construction projects. Installation is done at the construction site and moved by crane. TYPE / A – TYPE / B – TYPE / C – TYPE / D 4 standard types are produced. It can be used between the minimum H = 250 cm and the maximum H = 450 cm depending on the type and is pressed between floor and beam. Makes a maximum of 300 cm console out of the building facade.

Phone

+40 314 334 477

Phone Mobile

+40 745 967 947

Romania Branch Manager

Ibrahim KARSLI

E-mail

ibrahim@ozler.ro

Address

Soseaua Oltenitei, Nr. 21 D, Etaj 2, ap. 3, Popesti-Leordeni, Ilfov

    Telefon Call Now
    Whatsapp WhatsApp